FULLELECTRIC® Telescopic Slide Mounting: From preparation to commissioning

The FULLELECTRIC® slide is a smart telescopic slide with a self-learning opening function. This makes it particularly suitable for medical technology, robotics and automation, contract furniture and smart home systems. Unlike conventional telescopic slides, it features an integrated motor and requires a power connection. During mounting, several specific considerations go beyond purely mechanical fixing and are necessary to ensure proper operation.

The Correct Mounting Scenario for the FULLELECTRIC® Slide

Fundamental factors must be taken into account right from the mounting planning stage. First, depending on the model, the FULLELECTRIC® telescopic slide is designed exclusively for either horizontal or vertical mounting. Any other mounting orientation should be avoided. 

Secondly, the available installation space must be checked carefully. The area around the integrated motor is particularly important; this must be exposed and not come into direct contact with the cabinet. Depending on the installation situation, it may be necessary to create a suitable space inside the cabinet, for example, a cut-out or opening. Sufficient clearance should also be maintained between the motor and the cabinet wall to allow air to circulate around the motor.

Ample installation space must also be allowed for the cabling. There must be enough space behind the plug to ensure that the connected cables are not kinked during mounting. 

In addition, the specified installation heights and widths must be adhered to. The exact dimensions and specifications can be found in the relevant installation instructions.

Careful Mounting is Key

The FULLELECTRIC® slide is supplied as a motorised unit with a standard range of components. Installation is essentially the same as a conventional telescopic slide without a drive: the slide is secured to the cabinet, then the drawer or moving element is fitted.

When securing the slide, it is recommended that all the designated screw-fixing points are used. No additional holes should be drilled into the slide and only the fasteners provided should be used. 

The exact installation procedure described below depends on the selected control method, for example, push-button operation or touch-to-open/close. To avoid errors, it is essential to follow the installation instructions carefully.

It may be helpful to feed the cables into the cabinet after the slide has been fitted whilst the connections are still easily accessible but before the drawer is installed. However, the power supply should not yet be connected at this stage.

The FULLELECTRIC® Slide is Ready for its Maiden Journey

Before connecting the power supply, the electrical installation and cabling must be fully completed. It is important to note that, under certain circumstances, an incorrect control mode may be detected if power is supplied to the slide too early. 

It must also be ensured that the moving element is fully assembled, the entire travel path is clear and the slide is unloaded.

Once connected to the power supply, the FULLELECTRIC® slide automatically carries out a reference run, where the slide determines the available travel path and stores it in its memory. The movement must not be disturbed or interrupted during this process. 

If another reference run is required, the slide can be disconnected from the power supply and then put back into operation.

Avoiding Assembly Errors: Look out for typical signs

Installation errors may become apparent as early as the initial commissioning. Possible signs include the slide being unable to perform a reference run, incorrectly detecting a collision whilst extending, or failing to extend fully. Unusual motor noises may also indicate that something was not carried out correctly during installation or adjustment.

To avoid such problems, particular care should be taken when installing the FULLELECTRIC® slide.

Commissioning the FULLELECTRIC® Slide Reliably

From a mechanical point of view, the mounting of the FULLELECTRIC® telescopic slide differs only slightly from that of a conventional telescopic slide. Due to the integrated motor and the electrical control system, additional requirements must be taken into account.

However, if you plan the installation carefully and complete the electrical work thoroughly and neatly before connecting the power supply, you will lay the foundation for reliable operation.